Parameters

• General Information

• Primary Power

  PoE 802.3at / 9 - 24 VDC ± 20%, 550 mA maximum (reader current not included)

• Primary Host Communication

  Ethernet: 100Base-TX
  256bit AES* symmetric encryption for Controller to Server and Inter-Controller communications

• Secondary Host Communication

  Bluetooth 5.2

• Third Host Communication

  Wi-Fi IEEE 802.11ac 5GHz, or 2.4GHz/5GHz IEEE 802.11n
  256bit AES* symmetric encryption for Controller to Server and Inter-Controller communications

• Ethernet Network Connection

  Port 1: Ethernet: 100Base-TX
  Port 2: Ethernet: 100Base-TX
  (Configurable for Port Failover)

• RS-485 Connection

  Port 1: Armatura RS-485 / OSDP V2.2
  Port 2: Armatura RS-485 / OSDP V2.2
  Port 3: Armatura RS-485 / OSDP V2.2
  (Configurable for Port Redundancy dedicated on port 2 & 3)

• Number of Ports

  2*TCP/IP (IPv4 & IPv6)
  3*RS-485
  2*Wiegand
  1*RS-232

• Inputs

  4 states supervision, resistor values (5% tolerance),
  Normally open contact: use 1.2k, 2.2k. 4.7k or 10k
  Normally closed contact: use 1.2k, 2.2k. 4.7k or 10k
  Dedicated Panel Tamper IO Input*
  Dedicated Microchip Control Fire Alarm IO Input & REX Input for catastrophic situation

• Outputs

  1 relay, 1* Form-C with dry contacts

• Normally Open Contact Rating

  5A @ 30Vdc resistive

• Normally Closed Contact Rating

  5A @ 30Vdc resistive

• On-Board Monitor

  Size: 2.4", Resolution: 320*240, TFT Monitor
  Quickly view status of board, connected doors and for configuration information display

• On-Board Webserver

  Webserver for System Configuration and Management
  Dashboard for Controller Status Monitoring,
  Device Connection Status Monitoring & Configuration, Performance Status,
  Server Primary Controller Setting,
  Network Status Monitoring & Setting,
  IP Access Filter, SSL / TLS Certificates Setting,
  Access Log Export, Controller Reset, Debug Status Monitoring,
  Operation Log Monitoring, User Management,
  Date & Time Setting, Daylight Saving Time Setting,
  NTP Server Setting, General Status, Controller Information

• RFID Card Capacity

  As a Main-Controller: 800,000 (Storage)
  As a Door Unit: 400,000 (1:N) / 800,000 (1:1)

• Maximum RFID Card Number Length

  Maximum RFID Card Number Length

• Mobile Credential Capacity

  400,000 (1:N) (Bluetooth)
  400,000 (1:N) (NFC)
  400,000 (1:N) (Dynamic QR Code)

• Fingerprint Capacity

  As a Primary Controller: 100,000 (Storage)
  As a Door Unit: 50,000 (1:N) / 100,000 (1:1)

• Face Capacity

  As a Primary Controller: 100,000 (Storage)
  As a Door Unit: 5,000 (1:N) / 100,000 (1:1)

• Palm Capacity

  As a Primary Controller: 5,000 (Storage)
  As a Door Unit: 3,000 (1:N) / 5,000 (1:1)

• Access Level

  100,000 Levels

• Maximum Access Point

  129 (with 32pcs AHDU-1460 modules through TCP/IP connection)
  97 (with 24pcs AHDU-1460 modules through Armatura RS-485 over RS-485 connection)

• Maximum Readers

  258 (with 32pcs AHDU-1460 modules through TCP/IP connection)
  194 (with 24pcs AHDU-1460 modules through Armatura RS-485 over RS-485 connection)

• Maximum Inputs

  12,801 (with 33pcs AHDU-1460 modules through TCP/IP connection
  + 792pcs AHEB-1602 IO Expansion Board through OSDP over RS-485 connection)

• Maximum Outputs

  12,801 (with 33pcs AHDU-1460 modules through TCP/IP connection
  + 792pcs AHHEB-0216 IO Expansion Board through OSDP over RS-485 connection)

• Maximum IO Board

  24pcs (2*High Speed RS-485 communication)

• Maximum DU Modules

  32pcs (1*TCP/IP communication with AES-256 & TLS1.2 end to end secure channel)
  24pcs (OSDP over RS-485 communication with AES-128 end to end secure channel)

• Door Unit Controller Interface

• Maximum Input Current

  12 -24 Vdc +/- 10% regulated, 500 mA maximum each reader

• TCP/IP Mode

  Ethernet: 100Base-TX

• TCP/IP Protocol

  802.1X, VLAN, SSH, IPv4, IPv6, WebSocket

• TCP/IP Encryption

  Complied up to TLS1.2, AES-256 end to end secured communication channel

• TCP/IP Communication

  Spada Protocol over WebSocket

• RS-485 Protocol

  AES-256, Armatura RS-485 Secure Channel

• Armatura RS-485 Mode

  9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.

• Data Inputs

  TCP/IP standard supported.
  Maximum TCP/IP cable length: 330ft. (100m)
  RS-485 standard supported.
  Maximum RS-485 cable length: 3937ft. (1200m)

• Input Voltage

  12 -24 Vdc +/- 10% regulated, 500 mA maximum each reader

• RS-485 Protocol

  AES-128, OSDP Secure Channel

• OSDP Mode

  9600-115200 bps, OSDP V2.2, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.
  3rd Party reader: support OSDP V2.2 or above

• Wiegand

  Read: support up to 128 bits / Write: Support 26 / 34 / 37 bit, and other customised card formats

• Tamper Input (Wiegand)

  TTL levels, high > 3 V, low < 0.5 V, 5 mA source/sink maximum

• Buzzer Output (Wiegand)

  TTL levels, high > 3 V, low < 0.5 V, 5 mA source/sink maximum

• LED Output (Wiegand)

  TTL levels, high > 3 V, low < 0.5 V, 5 mA source/sink maximum

• Data Inputs

  RS-485, OSDP and Wiegand standards supported.
  Maximum RS-485 /OSDP cable length: 3937ft. (1200m)
  Maximum Wiegand cable length: 328ft (100m)

• IO Expansion Board Interface

• RS-485 Protocol

  TLS 1.2, AES-128, OSDP V2.2 Secure Channel

• OSDP Mode

  9600-115200 bps, OSDP V2.2, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.
  Maximum cable length: 2,000 ft. (609.6m)

• Software Interface

• TCP/IP Mode

  Ethernet: 100Base-TX

• TCP/IP Protocol

  NTP, SNMP V2 /V3, 802.1X, vLan, SSH, MQTT, IPv4, IPv6, DNS, DDNS

• TCP/IP Encryption

  Complied up to TLS1.2, AES-256 end to end secured communication channel

• TCP/IP Communication

  Spada Protocol over MQTT

• Cable Requirement

• Power & Relays

  One twisted pair, 18-16 AWG

• Ethernet

  CAT-5, minimum 330 ft. (100m)

• Ethernet Failover Port

  CAT-5, minimum 330 ft. (100m)

• RS-485 Reader Port

  9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.
  One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG,
  Maximum cable length: 3937ft (1200m)

• RS-485 I/O Device Port

  9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.
  One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG,
  Maximum cable length: 3937ft (1200m)

• RS-485 Failover Port

  9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.
  One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG,
  Maximum cable length: 3937ft (1200m)

• Wiegand Port

  20 AWG shielded Wiegand wire ,328ft. (100m)

• Mechanical

• Weight

  approx. 30oz (830g)

• Mounting

  Supported DIN35 Rail
  Compatible with UTA89 Din Rail Adapter for screwing on switchgear (Sold Separately)
  Wall mount

• Temperature

  -22°F ~ 158°F (-30°C~70°C), Operating & Storage

• Humidity

  0-95%RHNC

• Security Rating

  Secure Data Storage in EAL 6+ Certified Crypto Chip

• Software

Download

(Silver and above members can download after logging in)

• Name
• Size
• Update Time

• PDF

  Armatura Horizon Series Access Controller QSG V1.0.0-20230810

  3.09MB

  2023-08-10

  Download

• PDF

  ARMATURA Armatura CONNECT User Manual EN v1.3 20221031

  5.78MB

  2023-05-06

  Download

• PDF

  ARMATURA Armatura ID User Manual EN v1.3

  6.19MB

  2023-05-06

  Download

• PDF

  Armatura Access Hardware Functions Selection Guide 7Mar2023

  2.33MB

  2023-03-10

  Download

• PDF

  AHSC-1000_Leaflet_11-22-2022

  357.99KB

  2022-12-16

  Download

• PDF

  ARMATURA_Armatura Horizon Controller UM_EN v1.5_20221214

  13.21MB

  2022-12-15

  Download

Others