• Ultimate Authentication Performance
• PoE and 3rd Party Integration
• Threat Levels and Port Failover
• Advanced Access Control Functions
• Supervised and Programmable Inputs
General Information
AHDU-1160
Primary Power
PoE 802.3at/af / 9 - 24 VDC ± 20%, 550 mA maximum (reader current not included)
Primary Host Communication
Ethernet: 100Base-TX 256bit AES* symmetric encryption for Controller to Server and Inter-Controller communications
Secondary Host Communication
BLE 5.2
Third Host Communication
Wi-Fi IEEE 802.11ac 5GHz , or 2.4GHz/5GHz IEEE 802.11n 256bit AES* symmetric encryption for Controller to Server and Inter-Controller communications
Ethernet Network Connection
Port 1:Ethernet: 100Base-TX
Port 2: Ethernet: 100Base-TX
(Configurable for Port Failover)
RS-485 Connection
Port 1: Armatura RS-485 / OSDP V2.2
Port 2: Armatura RS-485 / OSDP V2.2
Port 3: Armatura RS-485 / OSDP V2.2
(Configurable for Port Redundancy dedicated on port 2 & 3)
Number of Ports
2*TCP/IP
3*RS-485
2*Wiegand
Inputs
4-state supervision, resistor values (5% tolerance),
Normally open contact: use 1.2k, 2.2k. 4.7k or 10k/
Normally closed contact: use 1.2k, 2.2k. 4.7k or 10k/
Dedicated Panel Tamper IO Input*
Dedicated Microchip Control Fire Alarm IO Input & REX Input for catastrophic situation
Outputs
1 relay, 1* Form-C with dry contacts
Normally Open Contact Rating
5A @ 30Vdc resistive
Normally Closed Contact Rating
5A @ 30Vdc resistive
On-Board Monitor
Size: 2.4", Resolution: 320*240, TFT Monitor
Quickly view status of board, connected doors and for configuration information display
On-Board Webserver
Webserver for System Configuration and Management Dashboard for Controller Status Monitoring, Device Connection Status Monitoring & Configuration, Performance Status, server Primary Controller Setting, Network Status Monitoring & Setting, IP Access Filter, SSL / TLS Certificates Setting, Access Log Export, Controller Reset, Debug Status Monitoring, Operation Log Monitoring, User Management, Date & Time Setting, Daylight Saving Time Setting, NTP server Setting, General Status, Controller Information
RFID Card Capacity
400,000 (1:N) / 800,000 (1:1)
Maximum RFID Card Number Length
Supports up to 512bits card number length
Mobile Credential Capacity
400,000 (1:N) (Bluetooth)
400,000 (1:N) (NFC)
400,000 (1:N) (Dynamic QR Code)
Fingerprint Capacity
50,000 (1:N) / 100,000 (1:1)
Face Capacity
5,000 (1:N) / 100,000 (1:1)
Palm Capacity
3,000 (1:N) / 5,000 (1:1)
Access Level
100,000 Levels
Maximum Access Point
1
Maximum Readers
2
Maximum Inputs
384 (using Armatura AHEB-1602)
Maximum Outputs
385 (using Armatura AHEB-0216)
Maximum IO Board
24pcs (3*High Speed RS-485 communication)
Input Voltage
12 -24 Vdc +/- 10% regulated, 500 mA maximum each reader
Maximum Input Current
12 - 24 Vdc +/- 10% regulated, 500 mA maximum each reader
RS-485 Protocol
AES-128, OSDP Secure Channel
OSDP Mode
9600-115200 bps, OSDP V2.2, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit. 3rd Party reader: support OSDP V2.2 or above
Wiegand
Read: support up to 128 bits / Write: Support 26 / 34 / 37 bit, and other customised card formats
Tamper Input (Wiegand)
TTL levels, high > 3 V, low < 0.5 V, 5 mA source/sink maximum
Buzzer Output (Wiegand)
TTL levels, high > 3 V, low < 0.5 V, 5 mA source/sink maximum
LED Output (Wiegand)
TTL levels, high > 3 V, low < 0.5 V, 5 mA source/sink maximum
Data Inputs
RS-485, OSDP and Wiegand standards supported.
Maximum RS-485 /OSDP cable length: 3937ft. (1200m)
Maximum Wiegand cable length: 328ft (100m)
IO Expansion Board Interface
RS-485 Protocol
AES-128, OSDP V2 Secure Channel
OSDP Mode
9600-115200 bps, OSDP V2.2, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit. Maximum cable length: 2,000 ft. (609.6m)
Data Inputs
OSDP and Wiegand standards supported. Maximum cable length: 500 ft. (152m)
Cable Requirement
Power & Relays
One twisted pair, 18 to 16 AWG
Ethernet
CAT-5, minimum 330 ft. (100m)
Ethernet Failover Port
CAT-5, minimum 330 ft. (100m)
RS-485 Reader Port
9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.
One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG,
Maximum cable length: 3937ft (1200m)
RS-485 I/O Device Port
9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.
One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG,
Maximum cable length: 3937ft (1200m)
RS-485 Failover Port
9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.
One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG,
Maximum cable length: 3937ft (1200m)
Wiegand Port
20 AWG shielded Wiegand wire, 328ft. (100m)
Mechanical
Dimensions
4.8” W x 10.2” L x 2.5” H (122 x 260 x 62.5mm)
Weight
30oz (830g)
DIN Rail Mounting
Supported DIN35 Rail
Compatible with UTA89 Din Rail Adapter for screwing on switchgear (Sold Separately)
Wall mount
Environmental Parameters
Operating Temperature
-22°F ~ 158°F (-30°C~70°C), Operating & Storage
Operating Humidity
0-95% RHNC
Certification
CE, FCC, UL, RoHS, UL294
Security Rating
Secure Data Storage in EAL 5+ Certified Crypto Chip
Software Interface
TCP/IP Mode
Ethernet: 100Base-TX
TCP/IP Protocol
NTP, SNMP V2 /V3, 802.1X, VLAN, SSH, MQTT, IPv4, IPv6, DNS, DDNS
TCP/IP Encryption
Complies with TLS1.2, AES-256 end to end secure communication channel TCP/IP Encryption
TCP/IP Communication
Spada Protocol over MQTT
(Silver and above members can download after logging in)
Armatura Horizon Series Access Controller QSG V1.0.0-20230810
3.09MB
2023-08-10
AHDU Series_Datasheet_17May2023
410.24KB
2023-05-17
ARMATURA Armatura CONNECT User Manual EN v1.3 20221031
5.78MB
2023-05-06
ARMATURA Armatura ID User Manual EN v1.3
6.19MB
2023-05-06
ARMATURA_Armatura Horizon Controller UM_EN v1.5_20221214
13.21MB
2022-12-15
You have added a new product to the inquiry form, check it now >
This website uses cookies to store information on your device, cookies can enhance your user experience and help our website work normally.
For more information, please read our
Cookie Policy and Privacy Policy.